|
Model
|
LR-ZB100N
|
|
Type
|
Distance based laser sensor
|
|
Appearance
|
Rectangular
|
|
Output
|
NPN
|
|
Cable connection
|
2 m cable
|
|
Detectable distance
|
35 to 100 mm 1.38" to 3.94" (650 to 0)*1
|
|
Standard detectable deviation
|
35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06"
50 to 100 mm 1.97" to 3.94": 3 mm 0.12"
|
|
Display resolution
|
2 (0.2 mm 0.008")
|
|
Spot size
|
Approx. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"
|
|
Response time
|
1.5 ms / 10 ms / 50 ms selectable
|
|
Type
|
Red laser (660 nm)
|
|
Laser class
|
Class 1 laser product
(IEC60825-1, FDA (CDRH) Part1040.10*2)
|
|
Indicator
|
3-digit 7-segment display (red),
output indicator (yellow),
DATUM indicator (orange),
1 spot indicator (green)
|
|
Timer
|
OFF/ON delay/OFF delay/One-shot
|
|
Power voltage
|
10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
|
|
Power consumption
|
450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
|
|
Control output
|
NPN Open collector,
Applied voltage 30 VDC or less, Control current 100 mA or less,
Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
|
|
Protection circuit
|
Protection against reverse power connection, output overcurrent, output surge, reverse output connection
|
|
Output operation
|
Light-ON / Dark-ON selectable
|
|
External input
|
Input time calibration: 35 ms or more ON, 35 ms or more OFF
Laser emission stop: 2 ms or more ON, 20 ms or more OFF
Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
|
|
Enclosure rating
|
IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3
|
|
Insulation resistance
|
20 MΩ or more (500 VDC)
|
|
Ambient light
|
Incandescent lamp: 4,000 lux or less
Sunlight: 8,000 lux or less*4
|
|
Ambient temperature
|
-10 to +50 °C 14 to 122 °F (No freezing)
|
|
Relative humidity
|
35 to 85 % RH (No condensation)
|
|
Storage temperature
|
-25 to +75 °C -13 to 167 °F (No freezing)
|
|
Withstand voltage
|
1,000 VAC, 50/60 Hz, 1 min
|
|
Vibration resistance
|
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
|
|
Shock resistance
|
1,000 m/s2, 6 times in each of the X, Y, and Z directions
|
|
Material
|
Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating,
Packing/Connector ring: FKM
|
|
Accompanying items
|
Instruction Manual,
Certification/Identification label (FDA)
|
|
Weight
|
Approx. 110 g (Including cable)
|
